The main process of producing degradable disposable environmentally friendly tableware is to mix sugarcane pulp, bamboo pulp, etc. in proportion according to the order requirements. The mixing ratio of sugarcane pulp and bamboo pulp varies depending on the customer's requirements for the product. Firstly, soak sugarcane pulp and bamboo pulp in different proportions in a hydraulic pulper for about 5 minutes. Then, start the hydraulic pulper for crushing and dissolving. Dilute the crushed slurry in the mixing tank, add oil and waterproof agents during the dilution process, and the mixing tank mixer will stir the slurry evenly. Then, use a slurry pump to pump the diluted slurry into the slurry supply tank and continue stirring. This completes the pulping process.

將供漿池內的漿液用漿泵通過供漿管道輸送到到一次性環保紙模自動生產線的成型機臺，在成型機臺上經過真空吸濾去掉漿液中的水分，使漿液中的纖維吸附在成型用的絲網上，形成濕胚，通過機械手將濕胚和絲網一起轉移到熱壓定型機，在230左右溫度和15噸左右壓力下，用熱壓模具將濕胚中水分擠掉，并將濕胚烘干，形成半成品。

The slurry in the slurry supply tank is pumped through the slurry supply pipeline to the forming machine of the disposable environmentally friendly paper mold automatic production line. The moisture in the slurry is removed through vacuum filtration on the forming machine, allowing the fibers in the slurry to adsorb onto the forming wire mesh, forming a wet embryo. The wet embryo and wire mesh are transferred together to the hot pressing shaping machine by a mechanical arm. At a temperature of around 230 and a pressure of about 15 tons, the moisture in the wet embryo is squeezed out using a hot pressing mold, And dry the wet embryo to form a semi-finished product.

將定型后的半成品轉移到切邊崗位，通過切邊機用切刀將多余邊料去除。

Transfer the finalized semi-finished products to the edge cutting position and remove excess edge materials using a cutting knife through the edge cutting machine.

切邊后產品轉移到檢驗工序，檢驗工按照客戶的標準進行檢驗，將不符合客戶要求的產品挑揀出來，符合要求的產品轉移到包裝工序，利用紫外線機進行，經過的產品在封閉的無菌包裝間包裝后入庫存放。

After trimming, the product is transferred to the inspection process. The inspector inspects according to the customer's standards, picking out products that do not meet the customer's requirements. Products that meet the requirements are transferred to the disinfection and packaging process, and disinfected using a UV disinfection machine. The disinfected products are packaged in a closed sterile packaging room and stored in the warehouse.

本文由一次性環保餐具友情奉獻.更多有關的知識請點擊:http://newg8.com真誠的態度.為您提供為的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

This article is dedicated to the friendship of disposable environmentally friendly tableware. For more information, please click on: http://newg8.com Sincere attitude. We will provide you with comprehensive services. We will gradually contribute more relevant knowledge to everyone. Stay tuned