The disposable lunch boxes made of plastic are mainly PP polypropylene and P S polystyrene, which are non-toxic, tasteless and odorless. PP is softer. The temperature of ordinary PP is - 6 degrees to + 120 degrees. Therefore, it is especially suitable for filling hot meals. It can be heated in microwave oven or even steamed in steam cabinet. The temperature of modified PP can be controlled from - 18 degrees to + 110 degrees. The lunch boxes made of this kind of PP can be removed. It can be heated to 100 degrees and put into refrigerator for refrigeration. PS is hard and transparent, but easy to tear. PS starts to soften when the temperature reaches 75 degrees, so it is not suitable for hot meals. But PS has good low temperature performance and is the best packaging material for ice cream.

有些飯盒為了降低本錢，用PP做盒子，用PS做盒蓋，益處是蓋子透明，且PS較硬，能夠用較薄片材制成，降低本錢，但這種設計消費者必需明白兩種資料的差別，切記不要把整盒飯連蓋子一并放入微波爐中加熱。

In order to reduce the cost, some lunch boxes use PP as boxes and PS as cover. The advantage is that the cover is transparent and PS is hard. It can be made of thin sheets to reduce the cost. But this kind of design requires consumers to understand the difference between the two kinds of information, and remember not to heat the whole box with cover in the microwave oven.

環保餐具資料

Environmental protection tableware information

紙板快餐盒是以300-350克的漂白硫酸鹽木漿紙板為原料，經過相似鈑加工的沖壓成型工藝停止模切黏合或模切壓制、定型等工序制成。為避免其滲油或滲水，要在其外表淋膜或施用化學助劑。在消費與運用過程中對人體是、無反作用的。但關于紙板的質量請求較高，隨之本錢也進步。

The cardboard fast food box is made of 300-350 grams of bleached kraft wood pulp and paperboard as raw materials, and through the stamping process similar to sheet metal processing, the process of die-cutting bonding, die-cutting pressing and setting is stopped. In order to avoid oil or water seepage, it is necessary to spray film or apply chemical additives on its surface. In the process of consumption and application, it is non-toxic and has no reaction to human body. However, the quality requirements for cardboard are higher, and the cost is also improved.

以淀粉為原料的可食用型快餐盒，望文生義，它是以淀粉類植物為原料，參加膳食纖維和其他可食用類助劑經攪拌捏合而成，它采用生物復配、聚糖交聯、鈣離子螯合等技術精制而成，有致密層、內防水層、膠網層和外防水層四局部構成。

The edible fast food box with starch as raw material is made of starch plant as raw material, dietary fiber and other edible additives by stirring and kneading. It is refined by biological compounding, cross-linking of polysaccharides, calcium ion chelating, and has four parts: compact layer, inner waterproof layer, rubber mesh layer and outer waterproof layer.

1、環捍衛生

1. Environmental protection of health

采用PS資料出品的水晶塑料餐具產品，無味、晶瑩剔透、環捍衛生、不變形不滲漏。

Crystal plastic tableware products produced by PS data are non-toxic, tasteless, transparent, hygienic, non-deformable and non-leaking.

2、平安

2. Safety and non-toxicity

環保餐具采用食品級資料PS制造，經國度相關部門檢測，契合國度GB18006，1-2009執行規范。

Environmental protection tableware is manufactured with food-grade information PS, which has been tested by relevant national departments and conforms to the national GB18006, 1-2009 implementation specifications.

3、潔凈無菌

3. Clean and sterile

環保餐具是運用精細注塑設備經過260度高溫一次注塑成型，經紫外線后上自動流水無菌包裝而成。

Environmental protection tableware is made of fine injection molding equipment through 260 degrees high temperature once injection molding, after ultraviolet sterilization and disinfection, automatic running water aseptic packaging.

4、外觀精致

4. Exquisite appearance

環保餐具透明晶瑩，外觀簡單精致，讓人愛不釋手。

Environmental friendly tableware is transparent and crystal, simple and delicate in appearance, which makes people fond of it.

5、一次性運用

5. One-time use

環保餐具為一次性運用，根絕餐飲過程中的傳染性疾病傳播。

Environmental protection tableware is a one-time use to eradicate the spread of infectious diseases in the catering process.

6、回收再應用

6. Recycling and reuse

環保餐具在運用后可回收，作為再生資料加工應用可消費家電類工業產品，循環運用，環保且節約能源。

Environmental protection tableware can be recycled after use. As a renewable material, it can be processed and applied to consume industrial household appliances products. It can be recycled, environmentally friendly and energy-saving.